CWP - Cooper-Weymouth, Peterson *
Equipment & Systems
FEEDS
STRAIGHTENERS
REELS
COIL PROCESSING SYSTEMS
COMPACT COIL SYSTEMS
PALLET DECOILERS
LEVELERS
COMBINATION EQUIPMENT
Cut-to-Length & Multi-Blanking Lines

Critical Finish CTL Lines
High Speed CTL Lines
Multi-Blanking CTL Lines


Spacesaver CTL Lines
HD ¼" Thick CTL Lines
Narrow Width CTL Lines

AUXILIARY EQUIPMENT
News
About Us
Contact Us
Formtek
CWP Inventory
CWP Knowledgebase / Tips
EQUIPMENT & SYSTEMS
Narrow Width or Light Gauge, CWP is your supplier of choice.
Narrow Width and Light Gauge Cut-to-Length solutions.
 
Narrow width or light gauge, CWP has the answers for your CTL needs
 

Cut-to-length and blanking Lines by CWP incorporate a variety of coil loading options, mechanical, hydraulic or pneumatic shears and high performance direct drop stackers. The cut to length lines shown are representative of our light gage narrow width capabilities designed to provide C-T-L system solutions that offer greater productivity easier set-up, faster changeovers and accurate part quality.

Cut To Length Line with punching and notching

8,000 Lb. Coils up to .093" thickness can be processed on this 24" wide Cut to Length and Punching Line. A precision coil straightener is incorporated to allow production of panel flat blanks. Radius corners and holes are added to the blank by the punch and notch dies. An inspection conveyor and direct drop stacker insure high quality stacks of blanks.

Cut To Length Line with integrated Bar Code Reader

This Cut to Length Line can process 8000 Lb. 30" wide coils into precision blanks. A double uncoiler is utilized to lower coil changeover and increase production output. A pneumatic shear and Servomax IV Servofeeder with bar code reader make setup of this line extremely fast.

Tandem Cut to Length Lines

The Tandem Cut to Length Lines above provides precision blanks to a transfer station. The Blanks are then transferred into the punch press as required to create the finished part.

High Speed Cut to Length Line

The mechanical shear and servo drop stacker provided on this line allow the end user to produce blanks 36" long 75 SPM


                

Bookmark and Share


Hinckley Road, Clinton ME 04927, (207) 426-2351 FAX: (207) 426-8868
Formtek Logo
*
* EQUIPMENT & SYSTEMS | ABOUT US | CONTACT US | FORMTEK | HOME | SITE MAP    
Terms of Use Terms & Conditions Non-Machinery Terms & Conditions© Copyright 1998-2015 Formtek-Maine. All Rights Reserved.  
Yoder Mfg. Dahlstrom Iowa Precision Hill Engineering Lockformer Formtek Inc. Formtek Group Winpro Rowe Machinery B&K Levelers Tishken